To start the CHARGE mode.
1, Insert the batteries into the slots.
WORKING MODES
Please refer to the BATTERY KNOWLEDGE on page 6 to select an appropriate
rate to charge the battery by the selected charge rate.
Useful when the battery needs to be recharged without determining the capacity.
Applicable for charging the batteries in a good performance and continuous use.
4, The LED indicator will be solid red during the charging process.
5, The LED indicator will be solid green after charging is completed.
CHARGE MODE
2, Short-press the
or buttons to enter the CHARGE mode when
"CHARGE" is blinking
3, Short-press the
or buttons to select the appropriate charge rate when
"SET CHARGE RATE" is displayed and click the button to start charging.
Note: If you would like to apply this setting to all the rest slots, PRESS and HOLD the
button for two seconds to start charging.
To start the TURBO CHARGE mode for those battery slots being in the charging process.
Note: This mode assumes batteries must perform very well. The charger will detect the battery
resistance automatically under TURBO mode. If the battery resistance is more than 40mΩ, the value
and LED red indicator will be blinking, and the charger will stop working to protect the battery.
TURBO CHARGE MODE
SKYRC NC2200 12.
SKYRC NC2200 Instruction Manual