This program calls back the data that was stored at "Save Data" program.
To load the data, press
Start/Enter
key once to blink the data number field and select
the number using
Inc> or <Dec
key then press Start/Enter key for more than 3 seconds.
Select the data number to be called back.
The data matched with the number will be displayed
at this time.
Loading the data.
You can inquire various information on LCD display during charging or discharging
process. When you press
<Dec
button the charger shows the establishment of user
settings. And also you can monitor the voltage of individual cell by pressing
Inc>
button
when the individual connection cable is linked to the Lithium battery being processed.
Start
Enter
Start
Enter
`>3seconds`
Load data program
Load data program
Various information during the process
The final voltage will be reached at the end of
process.
The internal temperature of the charger and the
temperature of battery being charged.
(The external temperature only will be displayed
when using the thermal probe.)
The present voltage of input DC power.
DEC
DEC
DEC
DEC
DEC
INC
Using the individual connection cable to the
battery, you can check the individual voltages of
each cell in the battery pack. When connect the
cable to the port on the right side of the charger
the program shows them for maximum 8 cells in
sequence. To utilize this feature, the battery pack
must have output connector that linked to each
cells.
Various information during the process
26
27
