Congratulations on your choice of SKYRC e680 Multi-Chemistry
Charger/Discharger/Power Supply. This unit is simple to use, but the
operation of a sophisticated automatic charger such as SKYRC e680
does require some knowledge on the part of the user. These operating
instructions are designed to ensure that you quickly become familiar with
its functions. It is therefore important that you read right through the
Operating Instructions, Warning and Safety Notes before you attempt to
use your new charger for the first time. We hope you have many years of
pleasure and success with your new battery charger.
SkyRC e680 is a high-performance, micro processor control charge /
discharge / power supply with battery management suitable for use with
all current battery types. It is with integral equalizer for six-cell Lithium-
Polymer (LiPo), Lithium iron phosphate (LiFe), Lithium-ion (LiIon) and
Lithium High Voltage (LiHV) battery with max. 8A charge current and 80W
charge power. For PB battery, e680 adds AGM and cold charge modes. It
can charge AGM battery, and Pb battery can be charged in cold charge
mode in cold days.
This charger can be powered by 11-18V DC or 100-240V AC power
source via the built in switch-mode power supply. Besides that, e680 is
able to power DC equipment such as tire sander, LED pit light and motor
checker, etc. The new features and functions will be listed and explained
in detail in the following pages.
Please BE SURE to read these INSTRUCTIONS, WARNING and
SAFETY NOTES before you use the charger for the first time.
Introduction
01 ·
e680
Mishandling batteries and battery
chargers is extremely dangerous,
which may cause fire and explosion.
