background image

NiMH/NiCd Battery Program

NiMH/NiCd Cycle Mode:

The  e680  makes  cycling  of  NiMH/NiCd  batteries  easy.  The  process  of  discharging 
and  recharging  (cycling)  can  be  performed  automatically  with  one  simple  step  and 
will  improve  the  performance  of  NiMH/NiCd  batteries.  We  strongly  recommend 
cycling any battery that has been discharged and stored for a period of time. This will 
increase the remaining usable battery life and also improve the battery performance.

After selecting the correct battery type, use the INC or DEC 
button  to  select  the  “CYCLE”  mode.  The  Cycle  Mode  gives 
you  two  cycling  options:  “DCHG>CHG”  or  “CHG>DCHG“. 
The “DCHG>CHG” option will first discharge the battery and 
then recharge the battery.

The  “CHG>DCHG”  option  will  first  charge  the  battery  and 
then discharge the battery. If this screen does not show your 
desired cycling option, press the START button once and this 
setting  will  begin  flashing.  Use  the  INC  or  DEC  button  to 
change this setting.

Pressing the START button again will cause the cycle count 
to begin flashing. Use the INC or DEC button to change this 
to the number of cycles you want the e680 to run. The e680 
can cycle the battery a maximum of 5 times consecutively.
Press and hold the START button for 3 seconds to start the 
Cycle Mode.

NiMH CYCLE 
DCHG > CHG 2 

NiMH CYCLE 
CHG > DCHG 5 

Once cycling has commenced, the charger will display the 
following real-time information: battery type, charging/ 

discharging current, battery voltage, working mode

,

elapsed 

time and charged/discharged capacity. You will also see “D>C“ 
or “C>D“. This will indicate which cycling order you have chosen.
Either  “D“  or  “C“  will  be  flashing. This  flashing  indicates  which 
part of the cycle is currently being executed.

NiMH  0.5A  9.6V 
D > C  004:04 

 

00034

 

Once  the  cycling  process  is  complete,  the  screen  will  read  “END:  CYCLE”  and  the 
charger  will  emit  a  ringing  sound.  The  e680  will  display  the  charged/discharged 
capacity for each cycle. Using the + and - buttons, you can scroll through this data 
for each cycle.

START/ENTER

19 ·

e680

Содержание e680









































Отзывы: