5.3 Electric Diagram Mod. PCP-98M and PCP-98T
Mod. PCP-98M
ON/OFF Switch
+
110/220 Volts Selector
Switch
ON/OFF Switch
Mod. PCP-98T
13
Use 250 ml of oil each time you need to refill gear box. The
following oils are recommended: SAE140, APIGL-4 or ANP1006.
02
1. Introduction
1.1 Safety
When not properly used the Meat Grinders Models PCP-98M
and PCP-98T can be potentially DANGEROUS. Servicing, cleaning or any
other operation shall be made by trained people.
The following instructions must be observed in order to avoid
accidents:
1.1.1
Always unplug the machine when cleaning, servicing or when any other
operation is needed.
1.1.2 N
ever use tools that do not belong to the machine during operation.
1.1.3
Before switching the machine on check if the Barrel Nº07 (Pic.01) is
firm in its position, if all its internal components are assembled as well as if
the Pan Nº02 (Pic.01) is mounted.
1.1.4
Never spray water or other liquid substances directly at motor, power
switch or any other electrical components.
1.1.5
Never use loosen clothes specially shirts with loosen sleeves during
operation.
1.1.6
Never put your fingers or any other object but the Stumper Nº01
(Pic.01) inside feeding throat.
1.1.7
Keep hands off turning parts.
1.1.8
Never switch the machine on with wet clothes or wet shoes.
1.1.9
Before using the machine make use it is properly grounded.
1.2 Main Components:
All components are made with carefully selected materials, in
accordance with Siemsen experience and standard testing procedures.
The Barrel Nº06 (Pic.02) and the Worm Nº03 (Pic.02) receive a superficial
treatment to isolate and facilitate cleaning.
Knife and discs are made of hardened material to provide a long life cutting
quality.