The Meat Grinders have been equipped with a safety system
approved by Brazilian
ABNT NBR 13767:2002 Norm
, in order to avoid
the grinder operation when the Pan is taken away.
SIEMSEN has developed a system to at the same time obey the
Norm and allow an easy operation of the machine.
In case the Pan is taken away the ON/OFF Switch will not be able to
switch ON the machine.
To allow the machine to operate again, it will be necessary to
replace and to fit the Pan on its due place, to restore the machine.
To withdraw the Pan,
ALWAYS WITH THE ON/OFF SWITCH
TURNED OFF
, just lift the front part of the Pan (Nº01), where hole is
located, and drag it rearwards. The ON/OFF Switch will remain out of use
(see picture below)
To replace the Pan,
ALWAYS KEEPING THE ON/OFF SWITCH
TURNED OFF
, just place the Pan support onto the activating pin, drag the
Pan forward and introduce the hole in the feeding throat.
When withdrawing or replacing the Pan, it is important to watch
how the Pan is fitted into the feeding throat, as well as the fitting of the Pan
Support (Nº02) on the Motor Housing (see picture below).
14
01
02
6. SAFETY SYSTEM
SUMMARY
01
1.2 Main Components
1.3 Technical Characteristics
1. Introduction
2
1.1 Safety
2
2
3
2. Installation and Pre Operation
2.1 Installation
2.3 Pre Operation
2.2 Grinding Device rotation
4
4
5
4
4. General Safety Practices
4.1 Basic Operation Procedures
4.4 Operation
4.2
Safety Procedures and Notes Before Switching the Machine On
4.5 After Finishing the Work
4.3 Routine Inspection
4.6 Maintenance
4.7 Advices
9
9
10
10
11
11
11
11
5. Analyses and Problem Solving
5.1 Problems, Cause and Solutions
5.2 Components Adjustment and Replacement
5.3 Electric Diagram Mod. PCP-98M and PCP-98T
11
13
12
11
3. Operation
3.3 Grind Device Assembling for Single Cutting
3.2 Grind Device Assembling for Double Cutting
3.1 Starting
3.4 Cleaning
6
6
6
7
7
6. Safety System
14
2.4 Feeding Procedures
5