Skymsen Fleetwood PSA-05, Инструкция по эксплуатации

Страница: 8 / 22

2.3 Feeding Procedures
IMPORTANT
Under no circumstances use your hands or any other kind of instrument to push
meat into the feeding throat. Use only the Stomper Nº05 (Pic.01) to do this
operation.
The processed meat has the function of lubricating and cooling the Head's internal
components. Therefore do not run the machine without load, as it would warm up
and damage the internal components.
The Meat Grinder Model PSA-05 is a relatively fast machine, therefore they
need equally be fed fast .
To feed the Meat Grinder place pieces of boneless meat on the Pan Nº04 (Pic.01)
and drive them with your hand towards the feeding throat entry only, then use the
Stomper Nº05 (Pic.01) to push them into the feeding throat where they will be naturally
sucked in by the worm.
3. Operation
3.1 Starting
IMPORTANT
Always switch the machine OFF before removing the Head. The machine is silent. Do
not leave utensils such as: knives, forks and similar on the Pan.
Be sure that the Head's internal components are assembled correctly as per order
indicated on Picture – 02.
Pushing the ON/OFF Switch Nº03 (Pic.01) to ON position located on the Motor
Housing right hand side activates the machine.
3.2 Head Assembling
IMPORTANT
Note the correct position of each Head's internal components. Assembling the
components in a different order could cause serious damages to the Head.
To assemble or disassemble the Head's internal components follow the below
sequence:
05
5.2 Ajustage et Substitiution des Composants
5.2.1 Aiguisement du Couteau et de la Plaque
Un bon aiguisement des couteaux et des plaques , a comme résultat que la
machine travaille avec moins d' effort et par conséquence augmente la vie utile des
composants. Pourtant , cherchez l' Assistant Téchnique le plus proche pour les
aiguiser correctement .
5.2.2 |Boite à Engrenages
Les Hacheurs Modèle PSA-05 travaillent avec une boite à engrenage
lubrifié avec de l' huile .
Pour obtenir une durabilité prolongée , faites vérifier par un Assistant
Téchnique , á chaque 5000 heures, le niveaux de l' huile .
La quantité d' huile nécessaire dans les Hacheurs Nodèle PSA-05 est de 180
ml, et l'huile recommendée est le UNITRON 140 – CASTROL ou similaire avec una
viscosité ( SAE 140 , APIGL-4 , ANP 1006 ) .
34
5.3 Electrical Diagram