Skymsen DAL-06S, Инструкция по эксплуатации

Страница: 8 / 36

8
2.2 Pre Operation
Before to use the equipment all parts to be in contact with the product shall be washed
with water and neutral soap (see item 3.3 Cleaning).
Make sure the equipment is firm on its working place.
PICTURE 05
WATER OUTFLOW JET
WATER ENTRANCE
DISC
IMPORTANT
Never place the hand on the Disc while it is on movement.
- Place the product inside the equipment.
- Close the Lid.
- Open the water flow.
3. Operation
3.1 Starting
To turn on your appliance you should follow the directions below:
- Plug the equipment to the electric network.
1 - Verify if the Lid No. 06 (Pic.01) is properly positioned.
2 - Press the ON/OFF Switch No. 04 (Pic.01) to position “I”.
3.2 Operating Procedures
IMPORTANTE
Before starting processing, the products must be clean, without soil and without
sand.