Skymaster DXS 23, Руководство по эксплуатации

Страница: 18 / 24

GB 16
7. The OSD Menu – System settings
3.5 Parental lock
It is possible to lock access to the menu or channels, e.g. with contents which are inappropriate
for young viewers. They can then only be accessed via entering a 4-digit password.
3.5.1 Menu lock
If you wish to protect certain areas of the OSD menu, set the menu lock to “On”.
3.5.2 Channel lock
Channels which you have locked in the Channel menu can be selected after entering a password if
you have set the channel lock.
3.5.3 New password
If you wish to change the preset password 0000, enter the new password here.
3.5.4 Confirm password
Confirm the new password. Memorise your new password, or note and store it in a safe place!
3.6 OSD setting
In this menu it is possible to edit the layout of the OSD menu.
3.6.1 Subtitle display
Select “On” if you wish to see the subtitles of a programme.
3.6.2 OSD duration
The display duration of information, error messages can be set to between 1 and 10 seconds.
3.6.3 OSD transparency
Select the transparency of the OSD menu - 10% (background slightly visible) and 40% (back g-
round very transparent).
3.7 Favourites
In this menu you can rename the eight favourite lists. Select an entry and press the [OK] button.
Press the number buttons 0-9 several times to select various characters. The [red] button enables
you to toggle between upper and lowercase letters. Use the [green] button to delete characters.
3.8 Miscellaneous
3.8.1 LNB voltage
The LNB voltage of the satellite receiver provides the LNB with an operating voltage and ensures
switching at the various reception levels. Note: Always leave the LNB voltage switched on, unless
you are expressly instructed to switch it off. This may be the case in rare large communal
installations.
3.8.2 Channel type
Decide whether all FTA channels, only coded or all the stored channels are to be displayed.
3.8.3 Signal
The signal can help you to align the antenna. The higher the pitch, the stronger the satellite signal
is. The signal can be heard after opening the Antenna Setting menu.