Skymaster DXS 23, Руководство по эксплуатации

Страница: 13 / 24

GB 11
7. The OSD menu – installation
2.2 Satellite list
All the preset satellites are displayed in the satellite list.
2.2.1 Satellite
Press the [OK] button to select the desired satellite. You also have the possibility to rename the
satellite ([red] button), to add a new satellite ([green] button) or to delete a satellite position
([blue] button).
Rename: Select the satellite position from the list and press the [red] button. Use the number and
control buttons to select the letters and characters.
Further important buttons on the screen keypad:
Space:
[0]
Delete: [green]
Save name and close keypad: [yellow]
Cancel: [blue]
Upper/Lowercase: [red]
2.3 Antenna setting
In order to carry out a successful search, you have to adapt the receiver to the existing antenna.
2.3.1 Satellite
Select the satellite whose settings you wish to change.
2.3.2 LNB type
Digital is almost without exception the correct choice for all conventional LNBs. Only select further
settings if they are expressly specified in the assembly instructions!
2.3.3 Transponder
Select a transponder of the selected satellite. Check the correct settings via the signal strength
and signal quality indicators.
2.3.4 DiSEqC
DiSEqC enables the reception of several satellite positions. If you have, e.g., aligned two LNBs to
two different satellites (ASTRA and HOTBIRD), use DiSEqC LNBs and a DiSEqC switch. For the
ASTRA position select the setting 1/2 and for the HOTBIRD position the setting 2/2. You can
control a 2, 4, 8 or 16-way switch and a DiSEqC-suitable multi-switch. Note: On some DiSEqC
switches the connections are marked with letters (A, B, C, D ...) instead of numbers. However, the
sequence is the same.
2.3.5 22 kHz
The 22kHz signal is used to switch a universal LNB (off = low band, 22kHz = high band). If you
have selected “digital” as the LNB type, switching occurs automatically. If you do not own a
conventional LNB, the setting has to be carried out manually.
2.3.6 Toneburst (“mini DiSEqC“)
The toneburst signal enables the reception of two satellite positions.
2.3.7 Polarisation
Satellite signals are transmitted on two levels (horizontal and vertical). Always select the AUTO set-
ting which enables the reception of both levels. In exceptional situations it may be necessary to
receive only the horizontal OR the vertical level, e.g. in household systems or to receive exotic
satellites.
2.3.8 Signal indicators
Signal strength
The signal strength indicator shows the entire level of the input signal.
Signal quality
The signal quality is extremely important for trouble-free reception. Always align the antenna in
such a way that the signal strength and signal quality achieve the maximum level!