Skymaster DS 66, Руководство по эксплуатации

Страница: 19 / 28

GB 17
7. The OSD Menu – System
3.3 Time
In order for the receiver to display the correct time and for the timer to start at the programmed
time, the time settings should be checked and may have to be adjusted.
3.3.1 GMT setting
GMT stands for Greenwich Mean Time and is the reference point for different time zones. If the
GMT setting is switched off you can enter the time manually.
3.3.2 Region
Choose the region you are in. If you are operating the unit in Germany, choose Berlin.
3.3.3 GMT offset
The difference in time between Central Europe and GMT is +1 or +2 hours - depending on whether
daylight savings time applies or not.
3.3.4 Date
To manually enter today's date (only if GMT is off).
3.3.5 Time
To manually enter the current time (only if GMT is off).
3.3.6 Daylight savings
Switch daylight savings on or off twice a year.
3.3.7 Time display
For receivers with a display it is also possible to display the time when in stand-by mode. To
achieve this, activate the menu item “Time display” with “On”. The function “On” or “Off” has no
significance for receivers without a display.
3.4 Timer Number
You can pre-program up to eight different timer events. For example, programs you do not want to
miss or to remind you of birthdays or anniversaries.
After quitting the menu ([MENU] or [EXIT]) the changes will be saved.
Timer Repeat
With Timer Repeat you can determine how often the timer is activated: once, daily, weekly, monthly
or annually. Choose “Off” and the timer is deactivated.
Timer Service
Choose “TV Channel” if you want to see a specific program or record it on a VCR. If you would like
to have a reminder of a particular event displayed, choose the “Message” option.
Reminder message or switch on channel
For a regular reminder choose “General”. The other options remind you of birthdays or anniver-
saries. If you have selected “TV Channel” under the “Timer Service”, at this point you can choose
the channel that will appear when it is switched on.
Reminder date
Enter the desired date (e.g. 7 November 2004) as follows: 07112004.
Switch on time
Enter the start time as four digits.
Duration
Enter the program duration as four digits. For a program lasting 90 minutes enter 01:30 (1 h 30 m).