1
Install the Wall Console
INSTALL THE WALL CONSOLE
1
1
Install the Wall Console
3
1
Route and Secure the wires
4
Locate the wall
console mounting
bracket at least 5
feet above the
floor
C4
x2
C3
x1
1
Connect the wires to the Wall Console
2
Secure the mounting
bracket with two screws
Wire Holder
Route the wire up the wall and across
the ceiling to the opener with wire holders
Connect the wires to the “Wall Button” terminals.
Wires are not polarity sensitivity (either wire to
either terminals)
1
Connect the Wires to the Opener
5
Actual Size
-14-
C4
C3
5 ft
Slide the wall console
onto the mounting bracket
until you hear a click.
Plug in the wires to the back of the wall console,
as shown.
- Wall Button must be installed
within sight of the garage door,
out of reach of children at a
minimum height of 5 feet
(1.5 meters), and away from all
moving parts of door.
- Be sure power is not connected
before installing the Wall Button.
- Wall Button should only be
activated when door can be seen
clearly, is properly adjusted and
there are no obstructions to door
travel.
- Always keep garage door in sight
until completely closed. Never
permit anyone to cross path of
closing garage door.
WARNING
WARNING
