Call diversion
The incoming call is diverted to a second indoor station. Shortly
press the function key activated,
The red LED 2 is ON.
Shortly press the function key again deactivated
A call cannot be diverted to all Scantron indoor stations. The diverting indoor station is not
signalling the diverted call.
Open the floor door
If the floor push-button at the floor door is pressed, the floor door
can be opened with the door release button (instead of the front
door) within 30 seconds.
Door release automatic
An incoming door call directly effects the opeing of the door if this
function is activated.
Shortly press the function key activated,
The red LED 2 is ON.
Shortly press function key again deactivated
Switching lights with the door release button
if no voice communication is established.
Parallel call
A second indoor station
sounds with the first one in case of an incoming door, floor or inter-
nal call. The ring tone sounds at both indoor stations.
Parametermenü
Internruf
menu
control function
selected
control function
(de-)activate control functions in the menu control function
Send control function
If control functions are programmed (max. 10), those can be (de-)activated in the menu con-
trol function. The switching modes of the control functions (ON/OFF) are indicated by with
colored points (red/green).
Further configurable functions
The menu display switches off auto-
matically after 5 seconds.
Observe during the configuration:
With the technical installation of
internal call destinations resp. control
functions, their nomination is fixed
too. These can be changed only by a
qualified electrician.
BRUskyline
version 1.0
Side 9
