20
DesignView Presentation System is a product of Skyline Exhibits
Patents Pending
©2011 Skyline Exhibits
DesignView
®
Presentation System
aPPEnDIX - nEc ProjEcTor
fReQUenTlY asKeD QUesTIons - Part 1
(obtained from nEc’s website)
1.
Where do I plug in my PC or DVD player?
nEc projector input panels feature rgB computer inputs, a composite video input (yellow rca type plug)
and an S-Video input. The rgB computer input (blue) and can also be used with an optional component
video adapter for connection to a DVD player or other video source, if desired.
2.
How do I turn on/off the projector?
The projector can be turned on with either the remote control, the control panel on the projector or via a
control system via rS232. With some projectors there is a main Power Switch that also has to be turned
on.
3.
How do I get the image from my computer to my projector (hot swap of pc)?
Function F* (this varies from computer to computer)
4.
How do I mute the picture?
Press “Picture mute” on the remote control, with the HTml page over the lan or when using a control
system via rS232.
5.
How do I magnify the image?
on models with this feature, image magnification can be controlled by pressing the + or – magnification
button on the remote control.
6.
How do I set up the auto adjust in the menu?
The auto adjust feature can be activated by pressing the “auto adj.” button on the projector control panel
or on the remote control.
7.
How do I set up or use the picture management in the menu?
on most nEc remotes there is a button labeled “picture”, by pressing this button the menu automatically
goes to the picture adjustment screen. another way to access picture management is to first press “menu”,
then “adjust” and then go to the picture management tab in the menu.
8.
How do I change from a blue screen to black when there is no signal to the projectors?
This can be done by going into the oSm and making the change there or by sending a specific rS232
command to the projector from a computer.
