Skyjack SJ6832 RTE Series, Руководство по эксплуатации

Страница: 43 / 112

43
SJ6832 RTE
221844ACAI
Function Tests Section 4 – Inspections Before Operation
4.3-9 Do a test of the function-enable
switch
1.
Make sure that the path you plan to travel is
clear.
2.
Pull the
emergency-stop
button
1
.
3.
Move the
lift/off/drive
switch
2
to the
drive
position
.
4.
Do not use the
function-enable
switch
3
, and
try to drive the MEWP by moving the controller
handle forward.
▪
Result:
The drive function does not operate.
4.3-10 Do a test of the steering function
1.
Move the
lift/off/drive
switch
2
to the
drive
position
.
2.
Squeeze and hold the
function-enable
switch
3
.
3.
Press the
steering rocker
switch
4
on top of
the
controller handle
5
to steer left and right.
▪
Result:
The steer wheels turn left and right.
4.3-11 Do a test of the drive function
1.
Make sure the path of intended motion is clear.
2.
Move the
lift/off/drive
switch
2
to the
drive
position
.
3.
Squeeze and hold the
function-enable
switch
3
.
4.
Slowly push the
controller handle
5
until the
MEWP starts to move. Then, release the handle,
so that it goes back to the center position.
▪
Result:
The MEWP moves in the forward
direction and then stops.
5.
Slowly pull the
controller handle
5
until the
MEWP starts to move. Then, release the handle,
so that it goes back to the center position.
▪
Result:
The MEWP moves in the opposite
direction and then stops.
4.3-12 Do a test of the anti-tiedown
function
1.
Make sure the path of intended motion is clear.
2.
Move the
lift/off/drive
switch
2
to the
drive
position
.
3.
Squeeze and hold the
function-enable
switch
3
for 7 seconds.
4.
Slowly push the
controller handle
5
to move
the MEWP in the forward direction.
▪
Result:
The MEWP does not move in the
forward direction.
6
2
3
5
1
4