Skyjack SJ643 TH Скачать руководство пользователя страница 46

Страница: 46 / 108

216201ADA

SJ643 TH & SJ843 TH

Section 4 – Pre-operation

Function Tests

FWD

REV

4.3 Function Tests

Function tests are designed to discover any
malfunctions before telehandler is put into service.
The operator must understand and follow step-by-
step instructions to test all telehandler functions.

Prior to performing function tests, be sure to read and
understand

Section 5 – Operation

IMPORTANT

Never use a malfunctioning telehandler. If
malfunctions are discovered, telehandler must
be tagged and placed out of service. Repairs to

telehandler must only be made by a qualified

service technician. After repairs are completed,
the operator must perform visual and daily
maintenance inspections & function tests again.

WARNING

Ensure that there are no personnel or obstructions

in test area and that there is sufficient room to test

all telehandler functions.

4.3-1 Test Starter Operation

WARNING

Entering and exiting the telehandler must only be
done using the three points of contact method.

Enter cab and close door (if equipped).

WARNING

The seat belt must be worn at all times.

Sit in the driver’s seat and fasten seat belt.

Using a spotter, adjust the mirrors.

Ensure parking brake is engaged and shift lever
is in neutral. Ensure all controls/switches are in
neutral position

Insert key into

ignition switch

and select on

position.

▪

Result:

Engine data display module 2 and

▪

glow plug indicator light 3 should turn on.

Wait until glow plug indicator light turns off then
turn the key to start position until engine starts
then return key to on position.

WARNING

DO NOT over crank the starter. Do not crank for
more than 15 seconds. Wait for 15 minutes before
attempting to start engine again. If engine fails

to start after multiple attempts, contact qualified/

competent repair personnel.

IMPORTANT

If the DEUTZ Engine Display Module displays
an error message when engine is running,
immediately shut down the telehandler and have it
serviced.

Содержание SJ643 TH













































































































Результаты поиска

Содержание SJ643 TH

Отзывы:

Похожие инструкции для SJ643 TH

Бренды по названию

Популярные бренды

Skyjack SJ643 TH, Руководство по эксплуатации

Результаты поиска

Содержание SJ643 TH

Отзывы:

Похожие инструкции для SJ643 TH

Бренды по названию

Популярные бренды