Skyjack 97 100 001, Руководство по эксплуатации

Страница: 52 / 98

Page 52 December 2007
SJ 86T
Component Identification (Special Options) Section 3 - Operation
3.5 Component Identification (Optional
Equipment/Attachments)
The following descriptions are for identification,
explanation and locating purposes only.
NOTE
Refer to option’s manual and labels
for actual weight. This weight must be
included when determining the total load
on the platform, including personnel and
other materials.
3.5-1 AC Outlet on Platform (If Equipped)
This outlet is a source of AC power on the platform. The
outlet is located on the right side of platform control
console and the plug is located beside hydraulic tank
in control compartment.
3.5-2 Work Light (If Equipped)
The work light assembly is mounted on top of the
railings of the platform.
1
Figure 3-1. Work Light
NOTE
Ensure base emergency stop button is
pulled out and platform control console
has been activated using off/base/platform
key switch.
1. Work Light - This light turns on when the work
light switch is activated.
WARNING
Work lights are not intended to replace
the ambient lighting required to navigate
and operate this MEWP.
3.5-3 Flashing Amber Light (If Equipped)
The flashing amber light is located on top of the turret
of the MEWP.
1
Figure 3-2. Flashing Amber Light
1. Flashing Amber Light - This light flashes
when boom function is activated. This works in
conjunction with all motion alarm.
NOTE
The combined weight of attachment,
panels, occupants and tools should not
exceed platform rated capacity.
3.5-4 Secondary Guarding Electrical (SGE) (If
Equipped)
The purpose of this device is to prevent sustained
involuntary operation of the lift, which may result from
accidental contact with the platform controls, and to
activate an alarm (audible/visual) to alert others of the
event.
WARNING
This device will not prevent collision
or eliminate the potential for injuries
resulting from a collision.
2
3 1
Figure 3-3. Secondary Guarding Electrical (SGE)