Skyjack 97 100 001, Руководство по эксплуатации

Страница: 32 / 98

Page 32 December 2007
SJ 86T
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the MEWP.
F
AMILIARIZA
TION
• Test Emergency Stop
1. Push in “ ” emergency stop button.
Result: Engine should shut down and
MEWP functions should not operate.
2. Pull out “ ” emergency stop button and
restart engine.
• Test Start/Function Enable/Emergency
Power Switch and All Boom Functions
WARNING
Ensure that there are no personnel or
obstructions in test area and there is
sufficient room for boom to swing.
1. Ensure “ ” emergency stop button is
pulled out.
2. Start engine.
3. Do not hold “ ”start/function enable/
emergency power switch in function
enable position. Attempt to activate each
boom and platform switch.
Result: All boom and platform functions
should not operate.
4. H o l d “ ” s t a r t / f u n c t i o n e n a b l e /
emergency power switch in function
enable position and activate each boom
and platform function.
Result: Engine speed increases from idle
to intermediate. All boom and platform
functions should operate as selected.
Test Platform Self-leveling
1. Lower boom to stowed position.
2. Adjust platform to a level position using
platform leveling switch, which controls
“ ” tilting up or “ ” tilting down
of platform.
3. Fully raise “ ” main boom.
Result: Platform should remain level at all
times and lifting speed should slow down
before boom reaches full height.
4. Fully lower “ ” main boom.
Result: Platform should remain level at all
times.
HOUR METER
QUARTZ
COUNTER
Base Control
Console
Off/Base/Platform Key
Switch
Emergency Stop
Start/Function Enable/
Emergency Power Switch
Function Tests Section 2 - Familiarization