16967.6 - July/2003
Meat Grinder
PCI-22 G
Models
CAUTION!
HAZARDOUS MOVING PARTS
Disconnect Power BeforeCleaning or Servicing
Instruction Manual
Страница 1: ...16967 6 July 2003 Meat Grinder PCI 22 G Models CAUTION HAZARDOUS MOVING PARTS Disconnect Power Before Cleaning or Servicing Instruction Manual ...
Страница 2: ... components following the order shown on picture 02 on page 04 It is recommended that you follow the order carefully Assembling the components in a different order could cause serious damages to the griding device When re installing the knife in the worm stud make sure that the cutting edge is facing outwards Your meat grinder is now ready to operate IMPORTANT Do not tighten the locking ring too m...
Страница 3: ...s to the griding device When re installing the knife in the worm stud make sure that the cutting edge is facing outwards 6 OPERATION Start the machine The PCI 22 G meat grinder works very fast therefore they require a fast feeding too Put the meat lumps on the tray and using the stomper No 01 Picture 01 push the meat into the feed throat where they will be sucked in by the worm Feed meat at a cons...
Страница 4: ...diately if you hear abnormal noises of fear that injuries may occur ALWAYS ground machine properly CONTACT your Distributor if you have any problems with the installation and operation of this machine 2 MAIN COMPONENTS The machine consist of an electrical motor that through a gear box operates a worm The worm feeds the meat to the knife and hole plate Several types of hole plates are available The...