manualshive.com logo in svg

Skydio Skydio X2, Руководство оператора

Поделиться
Скачать
Skydio Skydio X2 Скачать руководство пользователя страница 32

28

Skydio X2

 Color/Thermal - Operator Manual

© 2022 Skydio, Inc. All rights reserved. 

Flight

Hand launch

WARNING:

 Failure to acquire GPS lock prior to flight over water may result in erratic flight and/or emergency landing.

Acquire GPS Lock

Immediately after launching, fly laterally to acquire a GPS lock. This is a critical step that must be taken if you are 
going to fly your drone over water.

• 

If you can fly your drone 33 ft (10 m) above ground level when outdoors you have acquired a GPS lock

WARNING:

 Launching and landing Skydio 2 from your hand is an advanced maneuver only to be used 

when it is necessary, and it is advised that you do so only if you are an experienced pilot. Exercise extreme 
care to avoid injury if the drone takes off from your hand. 

NEVER hand launch your X2 when in GPS Night 

Flight mode.

 

To avoid injury stay away from and do not touch rotating propellers when they are spinning. 

See safety guidelines at 

https://skydio.com/safety

.

Step 1 

- Identify a clear area to launch, 10 ft (3 m) above, 15 ft (4.5 m) in front, and 3 ft (1 m) on either side

• 

Do not hand launch on windy days. If there is any wind, for your safety ensure that it is not blowing towards 
you

• 

If the wind is gusty or coming from different directions, consider a ground launch

Step 2

 - Create a launch pad on your open hand by lightly gripping the battery to stabilize, keeping the drone 

level and still

• 

Keep your fingers below the chassis and away from the propellers at all times

• 

Hold X2 at arm’s length from your body

Step 3

 - Point the camera away from you

Step 4

 - Ensure that the rear propellers will not make contact with your arm

Step 5

 - Initiate a launch

Step 6 

- Release as the propellers begin to spin up by slowly relaxing your grip. Keep your hand still and level.

• 

X2 will slide off your palm and take flight

• 

Do not push or throw the vehicle up in the air

Содержание Skydio X2

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды