2
Step-by-Step Installation Instructions
3.
Disconnect the
humidifier control wires
by grasping the nylon
connector firmly and
pulling straight out.
4.
Remove the cover
by turning the thumb
screw (circled) coun
-
terclockwise (
). Tilt
and lift the cover off the
frame.
5.
Pull out the drip tray
and evaporator pad
assembly by grasping
the top lip and tipping
out.
6.
Place the mounting
frame into the plenum
opening so that the
frame hooks over the
bottom of the opening.
Screw the frame to the
plenum.
7.
Stand the evapo-
rator pad upright
with the index mark
on top. Make sure
the wick is seated
securely in the drip
tray.
8.
Place the drip
tray on top of the
pad. Reinstall the
evaporator pad and
drip tray.
9.
Reattach the cover
assembly by hooking it
at the top of the mount-
ing frame. Secure the
cover by turning the
thumb screw at the
bottom clockwise (
).
1.
Locate the 2002
mounting template in
the humidifier carton.
Tape the template
lengthwise onto the fur
-
nace plenum,
making
sure it is level.
2.
Trace around the
template.* Remove the
template. Accurately
cut the plenum
opening.
*Cutout size is 13-1/8 in.
(33.34 cm) wide by 16-1/2
in. (41.91 cm) long.
IMPORTANT:
• Step 10 (and its sub-steps) refers
exclusively to Model 2002
—fan-powered
unit with manual Humistat.
