background image

Page 4 of 4 

ACTA Statement

 

 
 

This  equipment  complies  with  Part  68  of  FCC  rules  and  the  requirements 

adopted by ACTA. On the  bottom side of this equipment is a label that contains, among 
other information, a product identifier in the format US: AAAEQ##TXXXX.  If requested, 
this number must be provided to the telephone company. 

 
A  plug  and  jack  used  to  connect  this  equipment  to  the  premises  wiring  and 

telephone network must comply with the applicable FCC Part 68 rules and requirements 
adopted  by  the  ACTA.  A  compliant  telephone  cord  and  modular  plug  is  provided  with 
this  product.  It  is  designed  to  be  connected  to  a  compatible  modular  jack  that  is  also 
compliant. See installation instructions for details. 

 

The REN is used to determine the number of devices that may be connected to a 

telephone line. Excessive RENs on a telephone line may result in the devices not ringing 
in response to an incoming call. In most but not all areas, the sum of RENs should not 
exceed  five  (5.0).  To  be  certain  of  the  number  of  devices  that  may  be  connected  to  a 
line,  as  determined  by  the  total  RENs,  contact  the  local  telephone  company.  For 
products  approved  after  July  23,  2001,  the  REN  for  this  product  is  part  of  the  product 
identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the 
REN without a decimal point 

(e.g

., 03 is a REN of 0.3). For earlier products, the REN is 

separately shown on the label. 
 

If this equipment causes harm to the telephone network, the telephone company 

will notify you in advance that temporary discontinuance of service may be required. But 
if advance notice isn't practical, the telephone company will notify the customer as soon 
as possible. Also, you will be advised of your right to file a complaint with the FCC if you 
believe it is necessary. 
 

The  telephone  company  may  make  changes  in  its  facilities,  equipment, 

operations  or  procedures  that  could  affect  the  operation  of  the  equipment.  If  this 
happens  the  telephone  company  will  provide  advance  notice  in  order  for  you  to  make 
necessary modifications to maintain uninterrupted service. 
 

If  trouble  is  experienced  with  this  equipment

for  repair  or  warranty  information, 

please contact our company

If the equipment is causing harm to the telephone network, 

the  telephone  company  may  request  that  you  disconnect  the  equipment  until  the 
problem is resolved. 

 
Connection to party line service is subject to state tariffs. Contact the state public 

utility commission, public service commission or corporation commission for information. 

 
 

Содержание CK-1P3

Страница 1: ...l is placed ON HOLD from the base set or any one of the cordless phones the caller will hear the Promotion On Hold audio When the line is re answered the audio automatically stops It s that simple Installation 1 Position the CK 1P3 box under the base telephone with the jacks facing towards the back of the phone Remove the paper backing from the two double sided foam tape on the top cover of the CK...

Страница 2: ...om the bottom of the sensor board and carefully place it OVER the LINE buttons on the Panasonic base set as shown in Fig 2 The buttons on the SENSOR BOARD MUST be centered directly over the line 1 and 2 selector buttons on the phone The SENSOR BOARD MUST be attached to the phone for proper operation 6 Connect the Sensor Cable to the Sensor Board as shown in fig 2 7 Connect the POWER CUBE from the ...

Страница 3: ...y through Friday ONE YEAR LIMITED WARRANTY This SKUTCH PRODUCT is warranted against defects for a period of one 1 year from the date of the original invoice Within this period we will repair it without charge for parts and labor To obtain warranty service the product must be returned at the customer s expense to SKUTCH Electronics along with a copy of the original invoice After the unit has been r...

Страница 4: ...001 the REN for this product is part of the product identifier that has the format US AAAEQ TXXXX The digits represented by are the REN without a decimal point e g 03 is a REN of 0 3 For earlier products the REN is separately shown on the label If this equipment causes harm to the telephone network the telephone company will notify you in advance that temporary discontinuance of service may be req...

Отзывы: