47
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: [email protected]
Version No. 2.0
Document No. 97010703
SKS-Kinkel Elektronik GmbH
10006901 BSV2012 Video indoor station hands-free
EN
Step
Description
1
If unsure whether any or which call addresses have al
-
ready been programmed pick the menu point → Setup
→ Own address to check which call addresses have
been programmed in the device.
As default no additional call addresses are programmed.
2
Set the
main call address
(= 1
st
position in your storage space) at the DIP switch, this reacts
to the respective bell button of the door station. This first and main call address is visible only
at the DIP switch and is not shown in the menu.
3
Choose the indoor station‘s menu point
→ Setup →
Own address → New
.
Set a first
internal call address
(= 1st position in
your storage space, in the menu called Busaddr: 1)
using the arrow keys, this reacts to calls sent to the
indoor station. Each call address consists of a letter
(A to H) and a number (1 to 12).
4
To program further call addresses repeat step 3.
No more than four additional call addresses can be saved in the device.
Attention
The DIP switch must always be set to the indoor stations main call address (= first call
address), to keep the indoor station assigned to the respective bell button.
When choosing call addresses for more than one bell button mind that these must not
be used otherwise (e. g. when a bell button is already assigned to another indoor sta-
tion), or both indoor stations will ring when the respective bell button is used.
A maximum of four additional call addresses and/or internal call addresses the indoor station
reacts to can be programmed into an indoor station. If call addresses have to be changed
either all can be deleted or each one can be changed in the menu.
To call other indoor stations in the same system (= internal or group call) internal call addresses need to be saved
on one of the four storage spaces of the indoor station. To do so follow the steps below:
8.4.2
Deleting or changing internal call addresses from the menu,
the indoor station reacts to
For the BS2012 video indoor station free-hands either all call addresses
can be deleted at once or just single ones may be changed or deleted.
To delete all call addresses from the menu, keep hold of the program
-
ming key at the back of the device for 10 seconds. Shortly after starting
you will hear a short signal tone. Keep hold of the programming key
until a three second high signal tone is audible. This shows that deleting
is completed.