GERMANY
MAX.
1.
3.
5.
7.
6.
2.
4.
TUBELESS
MAX. 8,3 BAR / 120 PSI
BAR/PSI
DICHTMITTEL
SEALANT
DICHTMITTEL
SEALANT
MANUAL
¬
AIRSPY
¬
11610 + 11611
ALLROAD
ROAD
MOUNTAIN
For all valve types
Make sure that any dirt is removed from the AIRSPY sensor hous-
ing. Use a suitable coin to turn the battery cover through approx.
20 degrees anti-clockwise until the upper point on the battery cov-
er is aligned with the marking on the sensor housing. Remove the
battery cover and take out the empty battery.
The AIRSPY measures the tyre pressure during the journey and dis-
plays it on the SKS MYBIKE app, which is available free of charge
in the app stores.
DISPLAY ON GARMIN DEVICES
The AIRSPY Connect IQ app can be installed on a compatible de-
vice via the Garmin Connect IQ Store at https://apps.garmin.com
or the Garmin Connect Smartphone app, which is available in the
app stores. A list of compatible devices can be found there as well.
Instructions for using the AIRSPYs on a GARMIN device and for
connecting to the app can be found at https://www.sks-germany.
com/en/products/airspy-sv/ -> Manual
USING THE AIRSPY
The AIRSPY must be switched on so that a connection with the dis-
play device can be made. Move the running wheel to switch on the
AIRSPY. The AIRSPY switches off automatically after 10 minutes if
the bicycle is not moved. The data which are sent from AIRSPY to
the app are not saved by the SKS MYBIKE app.
Insert a new CR2032 battery into the sensor housing with the posi-
tive terminal facing the battery lid, fit the battery cover and twist it in
a clockwise direction until the markings line up.
8. Battery change
SKS MYBIKE APP
Place the pump head completely on the AIRSPY valve adapter and
move the locking lever down. Pump the tyre up to the desired pres-
sure. Unlock the pump head and pull it away from the AIRSPY valve
adapter. Screw on the valve cap.
The AIRSPY assembly must be removed from the valve shaft and
the Presta valve core of the bicycle valve must be unscrewed before
the tyre is filled with tubeless sealant through the valve shaft. Once
the tyre has been filled with sealant, re-insert the Presta valve core
and use the Presta valve tool to tighten it so that it is hand tight.
7. Filling with tubeless sealant
6.2 AUTO / SC DUNLOP
SCLAVERAND / PRESTA
