DA 1700 dual actuator
Technical User Guide
27
3.16 Cabling from motor and actuator
(A)
(B)
(C)
(A)
Drill a 10 mm hole for actuator cables at centre mark.
(B)
Drill a 13 mm hole for actuator cables at centre mark.
(C)
Select where to exit the cables at the side or at the
bottom and drill a hole at centre mark:
• 10 mm hole for the actuator cable at the top.
• 13 mm hole for the fan motor cable at the bottom.
Mount the actuator cable on the center pillar using:
• 2 x cable ties w/fir tree mount 148x3.6 for ø4.75 hole
Mount the fan motor cable on the motor suspension
bracket using:
• 3 x cable ties 188 x 4.8 mm, black
Before mounting the cone, pull the cables around the
ventilation duct and in through the drilled holes.
For sealing when leading through cables, see section
.