Skope Serene SC112N-A, Руководство по обслуживанию

Страница: 13 / 38

13
SERENE SC112N-A
Electronic Controller
Service Manual
Revision: 2.0
Application
SC112G
Controller Type SKOPE S4 EVO
Controller Model & Revision PZSKC0H002K (Rev 1.414)
SKOPE Part Number
ELZ11478-102
Setting Unit
SET0 Min Max
Parameter
102
CPS1017-102-SET0
Last revised on
27-Oct-2020
Full List
SET0
Access
Level
Range Description
Electronic Controller Parameter Sheet
d/2 - °C F - - Probe reading on 3rd Input (read only)
d10 -50.0 °C C -50.0 127 On demand defrost Start Temperature
d11 0 mins C 0 60 On demand defrost: start delay
d12 127 °C C -50.0 127 Enabling defrost condition: Control probe threshold
d13 1 C 0 1 Evaporator Fans During Defrost (0 = Off 1 = ON)
d19 30 mins C 0 200 No Downward Tendency Defrost - Start Delay (0 = function disabled)
d20 3 mins C 1 < d19 No Downward Tendency Evaluation (Sample Time)
d21 3 C 0 5 Number of NDT defrosts before R.S.F. "Err" alarm (0 = function disabled)
d22 0.1 °C C 0.0 5.0
No Downward Tendency Evaluation (Temperature Delta)
Alarm & Input Configuration Parameters
A0 2.0 °C C -20.0 20.0 Temperature Alarm Differential
AL 0.0 °C C -50.0 150 Low temperature alarm setpoint. (Relative if A0>0, Absolute (A0≤0)
AH 0.0 °C C -50.0 150 High temperature alarm setpoint. (Relative if A0>0, Absolute (A0≤0)
Ad 0 mins C 0 199 Temperature alarm delay ( 0 = AL and AH alarms disabled)
A10 2 mins C 0 10 Door Open Alarm delay (0 = door open alarm disabled)
A11 1 C 0 5 2nd Input Configuration
A12 3 C 0 16 Number of cA alarm events to trigger manual reset 'CA' alarm
A13 24 hrs C 0 240 cA alarm counter reset delay
A14 60 mins C 0 240
cA alarm reset delay
A15 1 C 0 1 Lights switched OFF when CHt, cA or CA alarm occurs
A18 1 C 0 1 Allow power cycle to reset CA alarm
A20 4 mins C A10 60 Faulty door/curtain switch E2 alarm delay
Ac 70.0 °C C -50.0 250 High condenser temperature alarm set point
AE 5.0 °C C 0.1 20.0 High condenser temperature alarm differential
Acd 0 mins C 0 250 High condenser temperature alarm delay
Acr 1 C 0 2 High condenser temperature alarm reset method
A21 2 C 0 5 3rd Input Configuration
Evaporator Fan Parameters
F0 3 secs C 1 100
Loads Activation Delay
Fd0 20 mins C 1 100 Fan DAY Duty Cycle : ON time
FdF 0 mins C 0 100 Fan DAY Duty Cycle : OFF time
Fn0 25 mins C 1 100 Fan NIGHT Duty Cycle : ON time
FnF 0 mins C 0 100 Fan NIGHT Duty Cycle : OFF time
Other Parameters
H0 1 C 0 207 Supervisor Serial address
H01 1 C 0 1 Baud Rate (0 = 9600, 1 = 19200)
H02 2 C 0 2 Stop Bits
H03 0 C 0 2
Parity ( 0 = None, 1 = Odd, 2 = Even)
H2 1 C 0 3 Enable Keypad
H4 0 C 0 1 Disable buzzer (0 = Buzzer Enabled, 1 = Buzzer Disabled)
H5 102 F 0 199 ID code (read-only)
Warning
1. Only make program modifications with reference to relevant Operating Manual.
2. This programming sheet is exclusively for SKOPE refrigeration systems with its dedicated Carel controller.
3. Any alteration from this program may adversely affect the SKOPE Refrigeration System operation.
4. Specification may change without notice. Please check with SKOPE Customer Service for latest revision.
Page 2 of 2