6
Installation
User Manual
SKOPE BME ActiveCore
Door Handles
Fitting Door
Handles
For transit purposes the door handles may be packed separately inside the
cabinet. If the door handles are packed separately, follow the steps below to
fit them to the door/s.
To fit a door handle
1. Remove the handle/s from inside the cabinet by carefully cutting the cable
ties securing the handle, and remove the packaging.
2. A metal spring clip is
fitted inside the handle
mounts at each end of
the handle.
Rotate the handle so that
the spring clips point up.
3. Locate
both
of the
handle mounts onto the
brackets on the front of
the door, and push the
handle down onto the
brackets until an audible
click is heard and the
handle locks into place.
If the handle does not lock into place, check the orientation of the handle
and try again.
If only one end of the handle locks into place, follow the steps over the page
to remove the door handle, and refit ensuring both of the handle mounts are
located onto the brackets before pushing the handle down and locking into
place.
Handle mount
Spring clip
(pointing up)
Handle
Bracket
Front of
door
Bracket
