SkoFlo Industries SF15000NMFB, Инструкция по эксплуатации и обслуживанию, Страница: 6 / 14

D. Unscrew and remove the base cap.
E. Screw a bolt into the thread on the piston (use handle retainer
lock bolt or any M8 bolt) and carefully pull out the piston assembly
and the springs. (See Figure II).
Figure II
F. If replacing the seal on the ceramic seat, remove the snap ring and seat
retainer. Use a hooked probe to carefully remove the seat. (See figure III).
Figure III
G. Lubricate new seat seal with Parker Super Lube or equivalent. Slide
seal onto seat holder. Install back up ring on low pressure side of
o-ring (toward outlet). Insert the seat into the body by slowly pushing
with a tool which will not chip the ceramic seat. Orient seat with
largest hole end into the body. Reinstall seat retainer and snap ring.
Figure IV
r:\msoffice\excel\e-mail\o_manuals\SkoFlo sf15000nmfa\sf15000nmfa-manual-a1
Page 6 of 13