Keys, locks and alarm system
Key
Key Overview
Locking the vehicle
Operating the boot
lid
Unlocking the vehi-
cle
A
Battery status warn-
ing light
B
Locking tab for re-
moval of the key bit
NOTICE
▶
Protect the key from moisture and strong vibra-
tions.
▶
Keep the grooves in the key clean.
The effective range of the key signal is about
30 m. The effective range can be reduced, e.g. due to
signal interference from other transmitters.
Removing the key bit
›
Press securing tab
A
.
The pendant part
B
of
the key bit folds out.
›
Press the securing tab
A
again.
›
Remove the key bit.
Troubleshooting
The battery in the key is almost empty
▶
After pressing a button on the key, the warning
light does not flash.
Or:
▶
A message stating it is necessary to change the
battery will be displayed.
›
Replace the battery
.
The vehicle cannot be unlocked or locked with the
remote control
There may be the following reasons.
▶
The battery in the key is empty.
›
Replace the battery
.
▶
The key is not synchronized.
Synchronize the key as follows.
›
Press one of the buttons on the key.
›
Unlock the door within 1 minute with the key via
the locking cylinder
.
If necessary, the key must be synchronized if one
of the buttons on the key has been repeatedly press-
ed outside of the effective range of the remote con-
trol.
Changing the key battery
The new battery must comply with the specification
of the original battery.
›
Remove the key bit
and partially insert it
into the opening.
›
Press down on the key
fob to release the top
cover.
›
Open the battery cov-
er.
25
Keys, locks and alarm system ›
Key