SKLZ.com
STEP 4–
ATTACH THE MOTOR
Slide the
Auto-Feed Motor with Clamp (D & E)
into the slot on the bottom of the
Straight Tube
(H).
Make sure the retaining pin slides into pin
hole and then clamp.
NOTE: Be sure the on/off button is on the same side as the white guide on the tube.
STEP 5–
ATTACH THE ROTATABLE END TUBE
Attach the
Rotatable End Tube (F)
to the
Straight Tube (H)
. You should be able to turn
the
Rotatable End Tube (F)
to your desired
angle.
STEP 6–
LOAD BALLS AND ADJUST SPEED
Make sure the pin is in the pin hole and load the
QuickSwing with balls. Adjust the timer on the
motor for how fast or slow you want the balls to drop out of the QuickSwing. Remove
pin then move the switch to the ON position. To change speeds, turn off the motor first
and then adjust the speed.
INSTRUCTIONS FOR PARTNER-FEED SET-UP:
Set up the QuickSwing the same way you would for the QuickSwing Auto-Feed but do
not attach the motor.
Pin
H
F
H
