Hit-A-Way
®
PTS
7
Replacing the Hit-A-Way Trainer:
Replacement Hit-A-Way trainers for the PTS are available on
SKLZ.com
or by
calling our toll free number:
1-877-225-7275
.
You will need a wrench to replace the Hit-A-Way trainer.
1. Set-up your PTS as if you were going to use it
(pg 4)
.
2. Using the wrench, remove the nut and washers from
the upper and lower integrated cord loop and set
them aside.
3. Pull out the upper loop and slip off the old Hit-A-Way
trainer. Repeat on the bottom.
4. Take the new Hit-A-Way trainer and slip the top cord
loop onto the upper loop. Then slip the bottom cord
onto the lower pole loop. Make sure the you can
properly read the Hit-A-Way logo on the height
adjustment sleeve before attaching the loop back onto
the PTS pole.
5. Slide the upper and lower loops back on to the PTS pole and completely
secure with the washers and nuts using the wrench.
2
3
SKLZ.com