Hit-A-Way
®
PTS
2a
2b
1
5
Set-up Instructions:
1. Find and secure a suitable hitting area with approximately
12 feet of free space around pole. Lay the PTS down on the
ground so the T-latch is facing upward. Unclip the leg strap
that is wrapped around the PTS, remove the extension pole
from its holder, and lay it on the side of the PTS base.
2. Turn the T-latch so it is vertical and pull it
out so you see the locking pins
(2A)
.
Turn the T-latch to the horizontal
position. The T-latch is now unlocked
and the locking pins should be resting in
grooves on the outside of the latch
(2B)
.
NOTE:
If the T-latch does not pull out fully, move one of the
legs away from the pole to loosen the tension on the spring.
3. Lift the base pole to the standing position, the 3 legs should
slide down the pole as you lift.
NOTE:
Make sure the area is clear of children and pets as the
legs may slide down the pole quickly. Make sure your
feet are between two poles when they slide down so
they don’t fall onto you.
4. Once the base pole is positioned with all 3 legs on the
ground, re-lock the T-latch (pull the T-latch out and turn it to the vertical
position and let the locking pins slide back into the spring). Lift the pole
slightly to lock the T-latch back into place. Once you hear a “click”, it is locked.
5. Place the extension pole onto the base pole, using the white
lines as guides to line up the two poles correctly. The
Hit-A-Way cord should not be wrapped around the poles (if so,
the poles are not lined up properly).
4
3