Hit-A-Way
®
PTS
Storing Your Hit-A-Way PTS:
1. Remove top Pole Extension and lay down on the ground.
2. Unlock the T-latch, turn to the vertical position and pull out. Turn the T-latch
to the horizontal position and let the locking pins rest in grooves.
NOTE:
If the T-latch does not pull out fully, lift up on the pole to loosen the
tension on the spring.
3. Pull the PTS base pole down towards the ground, making sure the T-latch
is facing upward. The legs should start to close when pulling the PTS pole
down. Lay on the ground.
4. Lock the T-latch and stand the PTS base
pole upright, wheels on the ground. Slide
the Extension Pole into the peg on the
base and wrap the leg strap around the
PTS and Hit-A-Way cords and clip to lock.
NOTE:
To easily transport your PTS leave the
extension pole attached and close
the legs as described above. Grab
the pole and pull the PTS back on its
wheels. You can either push or pull your
PTS to its desired location.
6
4