Operation and Installation CD401LR
Edition: 2013-11-05 Rev: 1.13
Page 26 of 28
APPENDIX 4
o
ther
options
with
the
CompaCt
display
______________________________________________________________
COMPACT OPTIONS
The Compact display unit can be used in the following modes:
Speed repeater
CD401LR
Multi repeater
CD401MR
Single axis EML
CD401E1 with JB60CD connection box
Dual axis EML
CD401E2 with JB60CD connection box
In these modes the following options are available
Speed repeater:
A simple repeater for speed in 1 or 2 axis and trip.
Limited functionality
Multi repeater:
A comprehensive reopeater for many of the normal
NMEA messages, also functions for user defined
messages.
EML 224 Single
axis speed repeater.
As above but with just longitudinal value.
EML 224 Dual axis
speed repeater.
As above
The software for all these systems is stored in the system and the system
configuration can be changed using a security code. This code can be
obtained from www.skipper.no. By sending an order to SKIPPER together
with the systems serial number. (Obtained by opening the code screen in
diagnostics). On entering the supplied code number, the system options will
be set. Please note that the cabling is different for repeaters and speed logs
and so these are not compatible without replacing the back plate.
CHANGING THE SYSTEM/ ADDING OPTIONS
The Compact display unit is being developed as a low cost display alternative
to full graphics displays already available. Most extra features are available for
the Compact and these can be activated using the CODE page in the setup
menu. On this menu, the systems unique ID is displayed, and the new options
can be purchased from the SKIPPER retailer to add extra functions. You will
receive a code to be entered in the codes screen
.
NOTE
:
It is important to note that pay option codes are unique for each
individual unit and will not work on other units
.
