Skipper DL850-270, Начало работы

Страница: 5 / 7

Cabling
The transducer cable should be routed to the transceiver box. Any excess cable should
be coiled in an area with little electrical noise (i.e. not next to a motor or generator).
Cables are 40m long as standard.
The transceiver end of the cable is colour coded, and the transceiver screw terminals
J503 and J502 are also colour coded. Attach the cables as per diagram p 62 operator
and installation manual
The cable from the transceiver box to the deck unit is connected as per diagram
below. This cable transmits large quantities of data so should be routed away from
potential noise sources. This cable is RS 422 with handshaking and should not be
effected by anything but extreme noise.
(See page 61 of Operator and installation manual)