2021-06-24
Page 29 of 38
CU-M001 User manual
On the ‘SEA TEST’ calibration page
Enter the calibration leg distance into the middle field, and then sail along the line at a constant speed,
pressing the “Start Leg 1” and “Stop Leg 1” at the beginning and end as instructed.
Turn the vessel and perform “Leg 2” along the same line
in opposite direction in the same speed.
If the system has GPS on an input (VTG) then the system
can be made to automatically stop the leg when the
desired distance has been sailed. In this case it is not
necessary to sail exact legs but just make sure leg 2 is
parallel and in the same area.
