Page 10 of 38
2021-06-24
CU-M001 User manual
Page A-E Navigation
Pages can be changed by using the “Navigate” arrows on the lower right side of the screen.
In each of the pages A-E the main area is programmable to enable/disable required information.
Page A is not possible to disable. SOG is always on in page A.
Configuration and enabling of pages is performed in “config” See “Runtime Screen setup”
Brightness (Dimming)
The brightness can be set from 1 to 100%.
If an unacknowledged alert is present, the screen cannot be dimmed to the lowest settings.
If the screen is dimmed too low to see. press and hold on the left of the screen, the dimming will
raise itself to default (50%)
