SKIMO B PLUS 1KW 24V – AIR CONDITIONING UNIT
CODE PRODUIT : 320B21
INSTALLATION, USER AND MAINTENANCE MANUAL
Page 8/21
Dimensions in millimetres (mm)
-The cut-out is 227mm long by 262 mm wide with 4 Ø10 mm holes for the fastening screws.
-The required foot-print inside the cabin to install the cabin panel is represented by the dimensions 293 x 387 mm.
9. FITTING THE SKIMO A/C UNIT ON THE ROOF
The Skimo A/C unit is heavy (approximately 35 kg). Take necessary precautions to avoid hurting
yourself or damaging the unit. Never install the Skimo A/C unit on your own.
1. Apply silicone on the 15x15mm
foam seal and around the 4 fastening
points (in red). Add some between the
fastening points (in yellow) to
complete the waterproofness
2. Place the Skimo A/C unit on the
roof. Fasten it from the inside of the
cabin with the 4 M8 screws and their
washers removed in section 7.3-
preparation of the Skimo A/C unit
3. Remove Skimo A/C unit cover:
remove its 6 fastening screws and
unplug the ventilator connector.
Cantilever limit
