SKIMO B PLUS 1KW 24V – AIR CONDITIONING UNIT
CODE PRODUIT : 320B21
INSTALLATION, USER AND MAINTENANCE MANUAL
Page 7/21
6. FURNITURE REQUIRED TO INSTALL SKIMO
•
Two 16 mm
2
(12V) or 10mm² (24V) diameter cables to connect SKIMO to the vehicle’s battery : a black one for
the ground and a red one for the positive, fitted with M6 crimp terminals on the SKIMO’s end and crimp terminals
on the battery’s end (according to the battery’s connection type, generally M10)
Caution: Maximum cable length: 5 m
•
One 1 mm
2
diameter cable to connect SKIMO to the D+ signal (“engine
running”) of the alternator, with a 1 way FASTON connector (male housing,
female contact) and a connector on the other end to connect to the D+ signal
coming from the alternator.
•
A fuse holder and a 100Amps (24VOLTS) fuse
The above mentioned components are available as a connection optional set, reference
274C03.
•
A silicone tube to seal the Skimo A/C unit on the vehicle’s roof
7. PREPARATION OF THE SKIMO A/C UNIT
Remove the 4 unit fastening screws circled in blue
Caution! Do not unscrew the 4 screws at the back of the unit
8. CABIN ROOF PREPARATION
Caution: Wear appropriate
protection according to the method and
tools used to cut-out and drill the roof
(Protective gloves, glasses, ear plugs…)
1. Place the template on the roof. (See
cut-out drawing below and template in
appendix)
2. Cut out and drill the roof following
the template
