ISSUE DATE: FEBRUARY 2018
ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: FEB 2018
APPROVED BY: S. GONZALEZ
PAGE 26 OF 29
PRODUCT INFORMATION MANUAL
SECTION: 12B LUMINETTE PRIVACY SHEERS POWERVIEW MOTORISATION
■
Method 1:
This method works best
when the fabric has been removed
from the headrail.
Insert the screwdriver into the slot on
the drive assembly. Twist about one-
fourth turn to release the spring-latch,
and pull down gently on the motor
assembly to separate.
■
Method 2:
This method works best
when fabric is still installed on the
headrail.
Insert a hex key into the side slot
on the drive assembly (either front
or back) to release the spring-latch,
then pull down gently on the motor
assembly to separate.
Remove the Headrail
■
With the fabric and motor removed, loosen and push
firmly up on the locking screws of the mounting
brackets until the locking tab lifts from the headrail.
■
Rotate the headrail down as shown, until
the headrail pops free from the bracket.
Locking Tab
Locking
Screw
Loosen and Push Up
SofTrak
™
Headrail
1
Tilt Down
2
Twist to
Release
