12.
Vise
Handle
Screw
Shaft
Base
Vise Stop
Adjustment
Bolts
Scale
Index
Line
Vise Stop
Quick Release
Lever
FIG. 8
Additional
Vise Stop
Mounting
Holes
Operation
Using the Vise Clamp
Changing Cutting Angle
1. Loosen the vise stop adjustment bolts with the wrench
provided, (Figure 8), DO NOT REMOVE.
2. Align desired angle on vise stop scale with index line in
base, and securely tighten bolts with the wrench
provided.
Maximum Cutting Depth
To obtain maximum cutting depth, position vise stop so
material being cut is approximately centered under wheel,
when wheel is lowered all the way down.
To reposition the vise stop:
1. Loosen and remove vise stop adjustment bolts with the
wrench provided (Figure 8).
2. Move vise stop to desired location holes, install and
securely tighten bolts with the wrench provided.
Quick Release Lever
To release work, turn vise handle to loosen, lift quick
release lever up (Figure 8), and pull screw shaft away from
work.
To lock work, push screw shaft toward work, lower quick
release lever and turn vise handle clockwise to tighten.
Long Workpiece Support
Support long workpieces to prevent sagging. Use auxiliary
workpiece support for long workpieces (Figure 9).
Vise Clamp
Workpiece
Support
FIG. 9
Cut-Off
End
1619PA9299 09-15 SPT64MTA.qxp_SPT64MTA 9/14/15 7:02 AM Page 12
