30
Maintaining Your Scroll Saw
Maintenance
Warning! To reduce the risk of injury, turn power switch
“off” and remove plug from the power source outlet
before maintaining or lubricating your Scroll Saw.
General
Frequently blow out any dust that may accumulate inside the
motor.
An occasional coat of paste wax on the work table will allow the
wood being cut to glide smoothly across the work surface.
Warning! Certain cleaning agents and solvents damage
plastic parts. Including: gasoline, carbon tetrachloride,
chlorinated cleaning solvents, ammonia and household
detergents that contain ammonia. Avoiding use of these and
other types of cleaning agents minimizes the probability of
damage.
Warning! To avoid shock or fire hazard, if the power cord
is worn, cut or damaged in any way, have it replaced
immediately.
Warning! All repairs, electrical or mechanical, should be
attempted only by trained repairmen.
Contact the nearest
Skil Factory Service Center, Authorized Skil Service Station or other
competent repair service.Use only Skil replacement parts; any other
may create a hazard.
Lubrication
Arm bearings
Lubricate the arm bearings with oil after 10 hours of use. Re-oil after
every 50 hours of use or whenever there is a squeak coming from
the bearings.
To lubricate
1. Remove the two rubber bearing covers.
2. Turn saw on its side as shown in (Fig. 21).
3. Squirt a generous amount of SAE 20 oil around the shaft end
and bronze bearing.
4. Let the oil soak in overnight in this condition.
5. Next day repeat the above procedure for the opposite side of
the saw.
Use only recommended accessories. Follow instructions that accom-
pany accessories. Use of improper accessories may cause hazards.
See page 12 for details on recommended accessories.
Guarantee
We guarantee SKIL appliances in accordance with statutory/country-
specific regulations (proof of purchase by invoice or delivery note).
Damage attributable to normal wear and tear, overload or improper
handling will be excluded from the guarantee.
In case of complaint please send the machine, undismantled, to your
dealer or the SKIL Service Center for Electric Power Tools.
Warning!
Freight and insurance costs are changed to the client, even for
warranty claims.
Informação
Brasil:
Skil Divisão de Ferramentas Elétricas
Caixa postal 1195 - CEP 13065-900 - Campinas - SP
✆
SAC
São Paulo........................................ (11) 2126-1950
Outras localidades.......................... 0800 70 45446
www.skil.com.br
Proteção do meio ambiente
As ferramentas elétricas e acessórios que não
servem mais para a utilização, devem ser
enviadas separadamente a uma reciclagem
ecológica.
No caso de descarte de sua ferramenta elétrica e
acessórios não jogue no lixo comum, leve a uma
rede de assistência técnica autorizada Bosch
que ela dará o destino adequado, seguindo
critérios de não agressão ao meio ambiente, reciclando as partes e
cumprindo com a legistação local vigente.
Reservado o direito a modificações.
2089_Manual_Skil_3335.indd 30
2089_Manual_Skil_3335.indd 30
10.02.10 14:19:39
10.02.10 14:19:39
