Skibo PEQUEA SF5, Руководство оператора

Страница: 7 / 18

5
HITCHING
Attaching to the tractor
Line up the hole in the tractor draw bar with the hitch on the spreader and insert an approved hitch
pin with a locking device or safety clip. The spreader hitch (Figure 2) is attached with two bolts and
can be moved up or down to accommodate various draw bar heights.
Attach the safety chain(s) to the tractor draw bar.
Raise the jack drop leg and secure with drop leg pin.
Attach the hydraulic pump (Figure 3) to the tractor PTO output shaft and secure it to the tractor by
using a chain around the stabilizer bar. The chain will both keep the pump from rotating and will
keep it from sliding off the shaft.
Plug in the wiring for the lights (if lighting option has been installed) and make sure that the lights
and turn signals are working properly.
Tractor Requirements
Your spreader is equipped with a 540 RPM PTO hydraulic pump and must be matched with a tractor
that meets this requirement.
Figure 2 Figure 3