manualshive.com logo in svg

Ski-Doo Tundra Skandic Series, Руководство оператора

Поделиться
Скачать
Ski-Doo Tundra Skandic Series Скачать руководство пользователя страница 87

85

PRE-OPERATION CHECK

• Remove snow and ice from body including seat, footrests, lights,

controls and instruments.

• Verify that track and idler wheels are free to turn and not frozen.

• Activate the brake control lever and make sure the brake fully ap-

plies before the brake control lever touches the handlebar grip. It
must fully return when released.

• Check the parking device. Apply parking brake and check if it oper-

ates properly.

• Activate the throttle control lever several times to check that it op-

erates easily and smoothly.

• Check operation of tether and engine cut-out switches, ignition switch,

headlamp switch (HI-LO), taillight, brake light and pilot lamps.

• Check gear shift lever position (models with mechanical reverse only).

• Verify that skis and steering operate freely. Check corresponding

action of skis versus handlebar.

• Check fuel and injection oil for levels and leaks. Replenish as nec-

essary and see an authorized SKI-DOO dealer in case of any leaks.

• Verify that air filter(s) is free of snow, if so equipped.

WARNING

The pre-operation check is very important prior to operating the
vehicle. Always check the proper operation of critical controls,
safety features and mechanical components before starting. If
not done as specified here, severe injury or death might occur.

WARNING

Always use a wide base snowmobile mechanical stand to prop-
erly support vehicle during any track verification. Slowly accel-
erate engine in order to rotate track at very low speed when it is
not on ground.

 WARNING

Throttle lever must operate easily and smoothly. It must re-
turn to idle position when released.

mmo2005-002b_1.book  Page 85  Monday, February 2, 2004  4:07 PM

Содержание Tundra Skandic Series












































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды