Ski-Doo MXZ X 600 RS 2021, Руководство оператора

Страница: 75 / 211

CONTROLS, INSTRUMENTS AND EQUIPMENT
Exiting Lap Record Mode
To exit the lap record mode, press the mode button.
Selecting Information on Lower Display (SELECT)
The information recorded by default are:
– Engine speed (RPM) on the upper display
– Vehicle speed on the lower display.
The upper display always records the engine speed (RPM) but the
lower display can record one of the following:
– Odometer (resets to 0 at each new recording)
– Vehicle speed
– Top speed (resets to 0 at each new recording)
– Top RPM (resets to 0 at each new recording)
– Engine coolant temperature (if equipped).
To change the information to be recorded on the lower display:
– Enter the lap record mode
– Choose the SELECT function, by repeatedly pushing DOWN the
heating elements switch.
– Push the heating elements switch UP once to activate the SE-
LECT mode.
– To choose the information to be recorded, repeatedly push
DOWN the heating elements switch.
– To confirm the selection, push UP the heating elements switch
(the word "SELECT" will be displayed to confirm the selection).
NOTE: Once the selection is made, you have 15 seconds to confirm
it. Otherwise, the selection will be cancelled.
You can now record the selected information.
Recording Information (RECORD)
To record information:
– Enter the lap record mode
– Enter the RECORD function, by repeatedly pushing DOWN the
heating elements switch
– To start recording, push UP the heating elements switch
– To pass to the following lap (following recording), push UP the
heating elements switch
– To stop recording, push DOWN the heating elements switch.
__________________
73