Ski-Doo MX Z 600, Руководство оператора, Страница: 9 / 103

7
;
SAFETY MEASURES
Observe the Following Warnings:
;
For vehicles with a parking brake always engage brake when ve-
hicle is not in use.
;
Throttle mechanism should be checked for free movement before
starting engine.
;
The snowmobile engine can be stopped by activating the emer-
gency cut-out button, pulling the tether cord or turning off the key.
;
Engine should be running only when belt guard and/or pulley
guard is secured in place. Never run the engine without drive belt
installed. Running an unloaded engine can prove to be dangerous.
;
Never run the engine when the track is raised off the ground or
with the hood opened or removed.
;
Maintain your snowmobile in top mechanical condition at all times.
;
Your snowmobile is not designed to be operated on public streets,
roads or highways. In most States and Provinces, it is considered
an illegal operation.
;
Electric start models only: Never charge or boost a battery while
installed on snowmobile.
;
Do not lubricate throttle and/or brake cables and housings.
;
Only perform procedures as detailed in this guide. Unless other-
wise specified, engine should be turned OFF and cold for all lubri-
cation and maintenance procedures.
;
Some snowmobiles are designed for the driver only and no provi-
sions have been made for a passenger.
;
The performance of some snowmobiles may significantly exceed
that of other snowmobiles you have operated. Therefore, use by
novice or inexperienced operators is not recommended.
;
The engine and components used in a particular model should not
be used on other models. Use of Rotax
® snowmobile engines in
other than SKI-DOO snowmobiles is not recommended or autho-
rized by Bombardier Inc.
;
Most components of this snowmobile are built with parts dimen-
sioned in the metric system. Most fasteners are metric and must
not be replaced by customary fasteners or vice versa.
;
Reverse models only: These snowmobiles are capable of a fast
reverse. Always remain seated and apply the brake before shifting.
Come to a complete stop before pressing the reverse button. En-
sure the path behind is clear of obstacles or bystanders. Fast re-
verse while turning could result in loss of stability.
Mmo9904a.book Page 7 Wednesday, September 16, 1998 9:09 AM