manualshive.com logo in svg

Ski-Doo MX Z 600, Руководство оператора, Страница: 11 / 103

Поделиться
Скачать
Ski-Doo MX Z 600 Скачать руководство пользователя страница 11

9

5. LIMITATIONS OF LIABILITY

This warranty gives you specific rights, and you may also have other legal
rights which may vary from state to state, or province to province.

WHERE APPLICABLE, THIS WARRANTY IS EXPRESSLY GIVEN AND
ACCEPTED IN LIEU OF ANY AND ALL OTHER WARRANTIES, EX-
PRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTIC-
ULAR PURPOSE.

Neither the distributor, any authorized SKI-DOO dealer nor any other per-
son has been authorized to make any affirmation, representation or war-
ranty other than those contained in this warranty, and if made, such
affirmation, representation or warranty shall not be enforceable against
BOMBARDIER or any other person.

In no event shall BOMBARDIER be liable for special, consequential or
incidental damages, including but not limited to loss of use and transpor-
tation costs. Some states or provinces do not allow the exclusion or lim-
itation of incidental or consequential damages, or limitations on how long
an implied warranty lasts, so the above limitation or exclusion may not
apply.

BOMBARDIER reserves the right to modify this warranty at any time,
being understood that such modification will not alter the warranty con-
ditions applicable to the SKI-DOO snowmobile sold while this warranty is
in effect.

6. CONSUMER ASSISTANCE

a) In the event of a controversy or a dispute arising in connection with this

BOMBARDIER LIMITED WARRANTY, BOMBARDIER suggests that
you try to resolve the issue at the dealership level. We recommend
discussing the issue with the authorized dealer's service manager or
owner.

b) If further assistance is required, the DISTRIBUTOR's Service Depart-

ment should be contacted in order to resolve the matter.

c) If the issue has still not been resolved, please submit in writing your

complaint to:

BOMBARDIER INC.
RECREATIONAL PRODUCTS
SNOWMOBILES

January 1998

® Registered trademark of Bombardier Inc. and/or affiliates.

In Canada:

BOMBARDIER INC.
RECREATIONAL PRODUCTS
SNOWMOBILES
CUSTOMER ASSISTANCE CENTER
VALCOURT QC  J0E 2L0

Tel: (450) 532-5000

In USA:

BOMBARDIER MOTOR
CORPORATION OF AMERICA
RECREATIONAL PRODUCTS
SNOWMOBILES
CUSTOMER ASSISTANCE CENTER
P.O. BOX 8035
7575 BOMBARDIER COURT
WAUSAU WI 54402-8035

Tel: (715) 848-4957

Mmo9904a.book Page 9 Wednesday, September 16, 1998 9:09 AM

Содержание MX Z 600








































































































Отзывы:

Нет отзывов