Ski-Doo Mini Z, Руководство оператора

Страница: 67 / 75

65
TROUBLESHOOTING
SYMPTOM: Engine turns over but fails to start
Possible causes What to do
1. Ignition switch, emergency cut-
out switch or tether switch is in the
OFF position.
Place all switches in the RUN or ON
position.
2. Mixture not rich enough to start
cold engine.
Check fuel tank level and check
starting procedure, particularly use of
the choke.
3. Flooded engine
(spark plug wet when removed).
Do not choke. Remove wet spark plug,
turn ignition switch to OFF and crank
engine several times. Install clean dry
spark plug. Start engine following
usual starting procedure. If engine
continues to flood, see an authorized
dealer.
4. No fuel to the engine
(spark plug dry when removed).
Check fuel tank level; turn fuel valve
on, check condition of fuel and
impulse lines and their connections. A
failure of the carburetor has occurred.
Contact an authorized dealer.
5. Spark plug/ignition
(no spark).
Remove spark plug then reconnect to
spark cap. Check that emergency cut-
out switch is at the ON position and
the tether cut-out switch cap is
snapped over the receptacle. Start
engine with spark plug grounded to
engine away from spark plug hole. If
no spark appears, replace spark plug.
If trouble persists, contact an
authorized dealer.
MMO2000-002A.book Page 65 Wednesday, March 24, 1999 1:31 PM