Ski-Doo Mini Z 2000, Руководство по ремонту

Страница: 139 / 160

Section 08 STEERING/FRONT SUSPENSION
Subsection 02 (STEERING SYSTEM)
MMR2000_133_08_02A.FM
08-02-5
Re-attach tie rod end to steering arm then secure
with clip.
NOTE: A rubber cord must be hooked in front of
skis to keep them closed.
NOTE: To measure toe-out, place a straight edge
against pre-adjusted track and measure distance
between front and rear of skis and straight edge.
Distances should be equal. After ski toe-out ad-
justment, distance at front of ski must be 0 to 3.0
mm (0 to 1/8 in) more than at rear on both sides
for a total toe-out of 0 to 6 mm (0 to 1/4 in).
TYPICAL
1. Straight edge
2. 0 to 3.0 mm (0 to 1/8 in) more at front than at rear
Check external threaded length not engaged and
firmly retighten lock nuts, as shown in the next
photo.
HOLD TIE ROD THEN TIGHTEN LOCK NUT
LUBRICATION
Steering Column
Use lithium grease (P/N 413 706 100) at U-clamp
and retaining support location on steering column.
Ball Joints
Lightly grease ball joints with bearing grease (P/N
413 706 100).
A06G03A
2
1

WARNING
Do not lubricate throttle and/or brake cable,
housing and spring coupler bolts.
A31G0CA