1. Safety instructions
The described product was manufactured in
accordance with all generally acknowledged
regulations pertaining to technology, occu-
pational safety, and accident prevention.
However, dangers that can cause physical
injury to persons or damage to other mate-
rial assets might still occur during the use of
the product.
!
These instructions must be read
and understood by all persons
who are involved with the installation,
operation, maintenance, and repair of
the product. These instructions must be
kept close to the equipment for future
reference.
Note that these installation instruc-
tions is an integral part of the product. It
must be handed over to the new opera-
tor of the product if the product is sold.
!
In addition to the information pro-
vided in the installation instruc-
tions, all generally applicable regulations
on accident prevention and the environ-
ment must be observed.
1.1 Intended use
The described product is for supplying cen-
tralized lubrication systems with lubricant
and is intended for use in centralized lubri-
cation systems. Other use or use beyond this
purpose is considered unintended.
Products of SKF must not be used in con-
junction with substances and mixtures clas-
sified as hazardous by the Annex I part 2-5
of the CLP regulation (EC 1272/2008), and
identified with hazard pictograms GHS01-
GHS06 and GHS08.
None of the products manufactured by
SKF can be used in conjunction with gases,
liquefied gases, pressurized gases in solution
and fluids with a vapor pressure exceeding
normal atmospheric pressure (1013 mbar)
by more than 0.5 bar at their maximum per-
missible temperature.
Unless otherwise noted, products of SKF
must not be used in conjunction with explo-
sive atmospheres according to the ATEX-Di-
rective 2014/34/EU.
!
All products from SKF may be
used only for their intended pur-
pose as described in this brochure and in
any instructions.
7
